Immersion Heaters
You’ll find information here about our range of immersion heaters for oil, bitumen, water and various chemicals.
Instructions
Z Type Immersion Heater
Flange Fitting Single Heating Element, from 1 to 9 kW. (Click Here)
X Type Immersion Heater
Flange Fitting Multi Element, from 3 to 42 kW. (Click Here)
G/H/Q Type Immersion Heater
Various Fittings Single Heating Element, various ratings. (Click Here)
Rod Type Immersion Heater
Various Fittings Multi-Element, various ratings. (Click Here)
![](https://akwaugh.com/wp-content/uploads/2023/11/1000ximmersen1.webp)
Heaters for Caustic Solutions
We manufacture a range of heaters specifically for caustic solutions.
The material used for all wet / heated parts is 316L Stainless Steel. This is generally impervious to corrosion in normal use.
Useful corrosion data can be found at the page here
Heater shown is our Z type flanged unit with one removable element plus Control and Safety (Manual Reset) Thermostats. Typical ratings are between 3 and 6 KW. The X type heater has multiple elements suitable for heavy duties up to 100kW.
Immersion Heaters
![1000xFlanged-Immersion-Heater](https://akwaugh.com/wp-content/uploads/2022/07/1000xFlanged-Immersion-Heater-768x576.jpg)
![1000xFlanged-Immersion-Heater1](https://akwaugh.com/wp-content/uploads/2022/07/1000xFlanged-Immersion-Heater1-768x576.jpg)
![1000xFlanged-Immersion-Heater-2](https://akwaugh.com/wp-content/uploads/2022/07/1000xFlanged-Immersion-Heater-2-768x576.jpg)
![1000xFlanged-Immersion-Heater-3](https://akwaugh.com/wp-content/uploads/2022/07/1000xFlanged-Immersion-Heater-3-768x576.jpg)